The SC suction solenoid for commercial applications was developed as an alternative low pressure drop shut off valve in a wide range of both port and connection sizes.
The R/S Type SC is a pilot operated solenoid. With cartridge (port) sizes available as large as 2- 5/8”, SC solenoids are capable of handling greater flow rates than other commercially available valves for suction applications in a non-flanged design. In addition, this unique design incorporates the same concept of cartridge interchangeability as found in Parker’s popular (S) PORT evaporator pressure regulators. This innovative design actually utilizes the same capacity cartridges (and valve bodies) as those used with the (S)PORT regulator series, as well as the same solenoid actuator, solenoid coil, and splice box coil housing. Capacity cartridges can be changed by simply unscrewing the valves’ four bonnet bolts in order to remove the adapter and cartridge assemblies.
With this flexible line of solenoid valves now supplementing the existing line of (S) PORT regulators having these same characteristics, a single reliable source for all suction line components is now available. This ductile iron-bodied solenoid valve with brazed copper couplings is suitable for most common refrigerants, certain oils and other fluids approved for use in refrigeration. This valve may be opened by means of a manual opening stem for servicing or in case of electrical power failure.
These solenoids are an integrated assembly of (3) three modules:
1) A body containing no moving parts
2) A capacity cartridge, which contains both piston and modulating plug
3) An adapter on which the pilot solenoid is mounted and which incorporates a manual opening stem which bypasses the pilot pressure around
Markets:
• Commercial Refrigeration
Features and Benefits:
• Pilot Operated
• Interchangeable Capacity Cartridges Same as Used on (S)PORT EPR’s
• Low Pressure Drop
• Manual Opening Stem
• All Service from the Top
• Sweat-in-place Without Disassembly
• Maximum Opening Pressure Difference (MOPD): 20.7 bar (300 psig)
• Design Pressure (MRP): 31.0 bar (450 psig)
• Molded Class “F” Coil Construction
• Pilot Light Available
Application:
• Low side control
Model Number
Please Configure Part for Model Number
Valve Type
SC1, SC2, SC II
Minimum Fluid Temperature (C)
-40°C
Minimum Fluid Temperature (F)
-40°F
Maximum Fluid Temperature (C)
105°C
Maximum Fluid Temperature (F)
220°F
Maximum Rated Pressure (bar)
31 bar
Maximum Rated Pressure (psig)
450 psig
Valve Style
Suction Solenoid Valve
Port Size (mm)
9mm (03) to 66mm (21)
Port Size (inch)
3/8″ (03) to 2-5/8″ (21)
Connection Size (mm)
22mm (07) to 66mm (21)
Connection Size (inch)
7/8″ (07) to 2-5/8″ (21)
Weight (lbs)
9 lbs or 14 lbs
Connection Type
Sweat- in- place w/o Disassembly
Power Volts/phase/Hz
110-120VAC ~ 50/60Hz 10W, 220-240VAC ~ 50/60Hz 10W, 208VAC ~ 60Hz 10W, 440-480VAC ~ 50/60Hz 10W, 24VAC ~ 60Hz, 240VAC ~ 50Hz
Operation Style
Pilot Operated and Manual Opening Stem
Additional Options
Pilot Light and/ or DIN Coil Assemblies Available
Material
Ductile Iron Body or Aluminum Bronze Bodied
Certificates
UL: SA5473 *Exception: 50 Hz versions are NOT UL Listed and CSA: LR20991-14
- Declaration of Conformity – Pressure Regulators A9, A9E, A9B, A9S, A9SE, A9SEX Hot Gas Bypass Regulators
-
Literature and Reference Materials
- Catalog – Flo-Con Commercial Valve Parts Kit Reference
- Dielectric Gasket Mounting Instructions
- Form 30-122 – Sporlan Solenoid Valve and Coil replacement Guide
- Form 30-167 – Sporlan Solenoid Valve Coil Nomenclature
- Form 30-245 – Sporlan Anatomy of a Solenoid
- Gasket Oiling and Adaptor/Bonnet Screw Tightening Order Instructions
- Open Frame Coil/Housing Assembly Mounting Instructions
- Refrigeration Control Valve Safety Procedures
- SC Installation Bulletin
- SD-15 – Sporlan Solenoid Vave Installation and Servicing Instructions
- Safety Guide
- Sizing Catalog
- Splice Box Coil Assembly Mounting Instructions