The S9A Pilot Assembly is to be used in conjunction with the S9A and S9W valves which are designed to promptly and fully open or close under conditions which make conventional solenoid valves unreliable or unsuitable.
The S9A Pilot Assembly is designed to simplify the specification and installation of an S9A or S9W. The S9A Pilot Assembly contains both the Pressure Solenoid, the Bleed Solenoid, and a strainer in a convenient package. This twin Pilot Assembly serves to admit condenser gas pressure to the piston for opening and to bleed this gas pressure to the suction line for valve closing.
Markets:
• Industrial Refrigeration
• Commercial Refrigeration
Features and Benefits:
• Low Pressure Drop for Low Temperature Operation
• Suitable to -50°C (-60°F)
• Maximum Rated Pressure (MRP) 27.6 bar (400 PSIG)
• Requires no minimum pressure drop to open
• Use on S9A and S9W Gas Powered Suction Stop Valves
Application:
• Use in viscous oil conditions
• Vertical pipelines
• Where very low pressure drop is required
Model Number
Please Configure Part for Model Number
Valve Type
S9
Port Size (mm)
50mm or 65mm
Port Size (inch)
2″ or 2-1/2″
Flange Type
FPT or Socket Weld
Connection Size
3/8″ to 3/4″
-
- Form 30-122 – Sporlan Solenoid Valve and Coil replacement Guide
- Form 30-167 – Sporlan Solenoid Valve Coil Nomenclature
- Form 30-245 – Sporlan Anatomy of a Solenoid
- Refrigeration Control Valve Safety Procedures
- S6N Product Bulletin
- SD-15 – Sporlan Solenoid Vave Installation and Servicing Instructions
- Safety Guide
- Solenoid Tube Gasket Instructions
- Strainer Product Bulletin
- Strainer Screen Assembly Replacement Instructions
