white parker logo

The CK-2D valves are employed as a low pressure drop, gas-powered suction stop valve for low temperature evaporators. These valves are used for suction stop and evaporator equalization following a defrost cycle.

The CK-2D is based on the same valve body and operational principles as the standard CK-2 valves making for easy field replacements. This heavy duty gas-powered valve is suitable for ammonia and other refrigerants, certain oils and other fluids approved for use in refrigeration. The CK-2D is a pilot operated, dual-position valve. The CK-2D is a normally open valve and will open on power failure. This valve is equipped with a manual opening stem. The Type CK-2D Gas-Powered Valve is furnished with FPT Internal NPT (U.S. Standard Taper Pipe Thread), Socket Weld, Weld Neck or ODS (solders over copper tubing of given diameter) connections. The valve may be easily removed from between the flanges for servicing.

 

Markets:

• Industrial Refrigeration

• Commercial Refrigeration

  Features and Benefits:

• Economical Solution to Evaporator Equalization after Defrost

• Low Pressure Drop

• Heavy Return Spring

• Manual Opening Stem

• Integrated S6B pilot solenoids

• Standard Coil Housing Meets NEMA 3R and 4 – Rain Tight

• Normally Open

• Maximum Rated Pressure (MRP): 27.6 bar (400 psig)

 

Application:

• Hot Gas Defrost

• Low temperature evaporators

TYPE

CK2D

MAXIMUM RATED PRESSURE (BAR)

27.6bar or 28bar

MAXIMUM RATED PRESSURE (PSIG)

400psig or 406psig

PORT SIZE (MM)

40mm to 100mm

PORT SIZE (INCH)

1-5/8″ to 4″

SOLENOID TYPE

S6A or S6B

PILOT FLANGE TYPE

FPT or Socket Weld

PILOT CONNECTION SIZE (INCH)

3/8″ or 1/2″

FLANGE TYPE

Socket Weld, No Flange, Weld Neck, ODS, FPT

CONNECTION SIZE

None or 1-1/2″ to 4″

COIL TYPE

Please Configure Part for Coil Type Specifications

STRAINER TYPE

Without Strainer or With Strainer

VALVE MATERIAL

Standard Valve Material or Meets Pressure equipment Directive (PED)

PLATING

No Plating