VALVES
Parker offers refrigeration and air conditioning components for residential, commercial, industrial and mobile markets. Parker combines the best components to deliver customized subsystems, kits, manifolds and leak-free value-added assemblies. We provide refrigeration parts such as valves, filter-driers and pressure regulators for use in supermarkets, air conditioning units, cold storage trucks and more.
Electronic Valve PEV
The PEV series of electronic modulating valves provide enhanced control for industrial refrigeration systems.
Flo-Con SC Commercial Solenoid Valve
The SC suction solenoid for commercial applications was developed as an alternative low pressure drop shut off valve in a wide range of both port and connection sizes.
Gas Powered Suction Stop Valve- CK-5
The CK-5 gas-powered suction stop valve provides the normal operating features of the R/S CK-2 suction stop valve and features a built-in failsafe to close the valve until pressure is equalized in the event of a power loss.
Gas Powered Suction Stop Valve- CK-6D
The CK-6D is a suction stop valve for hot gas defrost applications. This normally open valve features dual solenoids for equalization and a pressure regulator to prevent the valve from opening during defrost in the event of a power loss.
Gas Powered Suction Stop Valve- Pilot Assemblies
The S9A Pilot Assembly is to be used in conjunction with the S9A and S9W valves which are designed to promptly and fully open or close under conditions which make conventional solenoid valves unreliable or unsuitable.
Gas Powered Suction Stop Valve- S9A-S9W
The S9A and S9W valves are designed to promptly and fully open or close under conditions which make conventional solenoid valves unreliable or unsuitable. The S9 requires no minimum pressure drop to open which makes it ideal for certain applications The S9A and S9W are heavy-duty gas powered valves suitable for ammonia and other refrigerants, certain oils and other fluids approved for use in refrigeration. They are pilot operated semi-steel bodied valves. The valves may be opened by means of the manual opening stem for servicing or in case of electrical power failure. The Type S9A and S9W are pilot operated valves but uses an external source of higher pressure gas to operate the valve, and, therefore [...]
Gas Powered Suction Stop Valves- Ck-2
These CK-2 Gas Powered Suction Stop Valves are used on low temperature applications to positively close suction lines and both liquid legs and gas returns on flooded evaporators.
Gas Powered Suction Stop Valves- Ck-2D
The CK-2D valves are employed as a low pressure drop, gas-powered suction stop valve for low temperature evaporators. These valves are used for suction stop and evaporator equalization following a defrost cycle.